Dodatkowe przykłady dopasowywane są do haseł w zautomatyzowany sposób - nie gwarantujemy ich poprawności.
Concentrated load of magnitude acts at a distance from the support A.
Suspension bridges are susceptible to the heavy concentrated loads presented by railroad traffic.
The two cases with distributed loads can be derived from the case with concentrated load by integration.
Where the expressions within the integrals on the right hand sides are the fixed end moments caused by the concentrated load .
Member CD is loaded at its midspan with a concentrated load of magnitude .
Second, a road base must spread the concentrated load of vehicles using the road to a large area of the weaker soil below.
An illustration of the Macaulay method considers a simply supported beam with a single eccentric concentrated load as shown in the adjacent figure.
These were known as Geballte Ladung ("concentrated load").
Most of his designs used an unstiffened bridge deck, before it became clear that this form was vulnerable to wind forces and unstable under concentrated loads.
Fast as it responded and highly conductive though it was, it could not handle that frightfully concentrated load.
It represents the case of a beam resting on two roller supports and subjected to a concentrated load applied in the middle of the beam.
All other conditions being equal, a shorter wheelbase vehicle represents a more concentrated load to the track than a longer wheelbase vehicle.
Maximum Stresses under Concentrated Loads (1890)
No plywood-skin fuselage is truly monocoque, since stiffening elements are incorporated into the structure to carry concentrated loads that would otherwise buckle the thin skin.
These are typically uniformly spaced along the girder with additional stiffeners over the supports and wherever the bridge supports concentrated loads.
Two ingots he loaded in the planes, and went away- the planes staggering with the concentrated load of mighty blocks of yellow buttery metal.
It is also employed to confer resistance to concentrated loads by providing enough localized resistance and stiffness for a load to spread through a wider area.
Available dynamic loading types include concentrated loads, displacements, seismic loads, uniform pressures, element removals, and moving loads.
If there are only concentrated loads on the structure, the problem will be easy to draw M/EI diagram which will results a series of triangular shapes.
Bryant used developments that had already been in use on the railroads in England, but he modified his design to allow for heavier, more concentrated loads and a three-foot frost line.
A simple intuitive justification of this size effect may be given by considering the flexural failure of an unnotched simply supported beam under a concentrated load at midspan (Fig. 2d).
Typically partial uniformly distributed loads (u.d.l.) and uniformly varying loads (u.v.l.) over the span and a number of concentrated loads are conveniently handled using this technique.
Both fields will normally be continuous within each extended part of the system that does not contain any concentrated loads and that can be regarded as a continuous medium with smoothly varying constitutive equations.
For example, when a uniformly distributed load of intensity is acting on a beam, then an infinitely small part distance apart from the left end of this beam can be seen as being under a concentrated load of magnitude .
The walk ground to a stop, not being designed for six tons of concentrated load; fuses had blown, circuit breakers had opened, and pedestrian traffic at the busiest time of day was thrown into confusion for twenty blocks of the shopping district.