Dodatkowe przykłady dopasowywane są do haseł w zautomatyzowany sposób - nie gwarantujemy ich poprawności.
These 12 cartridge heaters are arranged in a ring inside of the melting head.
The cartridge heater may be divided in 7 main parts:
Cartridge heaters are usually a quarter-inch or less in diameter and up to a few inches long.
The sheath is the part of the cartridge heater which makes contact with the material or substance to be heated.
Cartridge heaters These are most commonly found in applications where a larger mass of metal needs to be heated.
Heat is provided by a pair of cartridge heaters and controlled by a temperature controller.
Pure water in the boiler is heated to its boiling point using a pair of cartridge heaters with variable power control.
The first swaged cartridge heater, the patented device greatly increased heat transfer efficiency.
Soldering irons and cartridge heaters are very often heated by Joule heating.
No need for Cartridge heaters.
A hot runner system is more complicated, often using cartridge heaters to keep the plastic in the runners hot as the part cools.
Since cartridge heaters are installed in a wide variety of machines, manufacturers must design the heaters to meet certain clearances.
Depending on the clearance and the design of the machine where the cartridge heater will be inserted, the type of wire used will vary.
Another type of heater, the cartridge heater, is often used to heat blocks of material or high-temperature components such as propellants.
To ensure the MgO fills the empty space between the sheath and the coil, the cartridge heater is vibratory filled.
Fiberglass is the commonly used for cartridge heaters and other high temperature applications, such as automotive wiring harnesses and industrial equipment.
A few years later, George invented the FIREROD cartridge heater.
The temperature of the Nichrome wire and the cartridge heater were controlled by thermostats wired with thermocouples that were placed inside its body and tail.
To control the temperature of the interior of robosquirrel's body, a coiled Nichrome 80 resistance wire was inserted and a cartridge heater was inserted into its tail.
This incorporates two Eurotherm modules, one designated the "Cold Controller", for cryostats, the other the "Hot Controller", for furnaces & cartridge heaters.
A cartridge heater is a tube-shaped, heavy-duty, industrial joule heating element (electrical resistance) used in the process heating industry, usually custom manufactured to a specific watt density, based on its intended application.
Tubular and sheathed heaters are variations of cartridge heaters and are constructed by sealing a nickel chrome alloy wire element, insulated by magnesium oxide granules, into a metal sleeve.
Potential from an alternating current source, which can either be 2 phase or 3 phase, flows through the coiled Nichrome wire, heating up the wire, which in turn, heats the cartridge heater sheath.
A wide range of Terminal Blocks or Caps for use with Hot Water Elements and Cartridge Heaters are produced in a range of bodies selected after consideration of the operating conditions and manufacturing process chosen.
HEATERS Split sheath improves cartridge heater operation: Watt-Flex cartridge heaters made by Dalton have a split sheath construction which allows each half of the heater to expand independently when energized.