carriage bolt

The head of a carriage bolt is usually a shallow dome.

They are held in the correct position by carriage bolts and wing nuts.

But the sun was setting and I needed new carriage bolts, not to mention some means of cutting out the old ones.

This will allow the carriage bolts to be removed.

And he had to bore holes to fit the signs to poles with carriage bolts.

Two carriage bolts were cut from the fitting side to allow access to the bottom side.

First attach the door bracket to the door with carriage bolts.

The guard plates should be secured with round-head carriage bolts.

Carriage bolts were developed for use through iron strengthening plates on either side of a wooden beam.

The legs can be secured with carriage bolts fastened by nuts and washers.

Don't forget to ask the real estate agent about the mysterious basement door, nailed shut with 39 6-inch-long carriage bolts.

Turn the carriage bolt into the T-nut.

Fasten the posts together with galvanized carriage bolts.

Plough bolts are a flush-fitting carriage bolt, where the head is countersunk beneath the surface.

First, I had to remove the carriage bolts that secured the rotten boards to the benchs steel frame.

Then install carriage bolts, three-eighths of an inch in diameter, using nuts and flat washers.

Closely related to carriage bolts are timber bolts, meant for use with large wood planks and structures.

Cup Square Carriage Bolts Heavy duty fixing available in all sizes.

Space the holes evenly, then bolt the stringers temporarily with 3/8-inch-diameter carriage bolts, flat washers and nuts.

Drill a hole through the door and insert the carriage bolt from the outside; secure it with a nut and washer from the inside.

Guards usually mounted onto door with two carriage bolts going through door and anchored with a nut and cap cut on the inside.

The switchboard built by Coy was, according to one source, constructed of "carriage bolts, handles from teapot lids and bustle wire."

All of the carriage bolts, nuts, and screws used are made from stainless steel and the timber used is kwila hardwood.

A carriage bolt, coach bolt or round head square neck bolt is a form of bolt used to fasten metal to wood.

I strike up conversations with the oldest people who work there, we talk about machine vs. carriage bolts and whether to use a compression or a flare fitting.